Check the box next to the items you want to install. Setting Jumpers Use the motherboard jumpers to set system configuration options. Installing the Motherboard 20 Follow these instructions to install an add-on card: Using BIOS 31 Boot Other Device Yes When enabled, the system searches all other possible locations for an operating system if it fails to find one in the devices specified under the First, Second and Third boot devices. Secure the metal bracket of the card to the system case with a screw. Onboard parallel port header This is a header that can ba used to connect to the printer, scanner or other devices. Shutdown Temperature Disabled Enable you to set the maximum temperature the system can reach before powering down Warning Temperature Disabled This item enables or disables the warning temperature.
|Date Added:||25 May 2016|
|File Size:||47.38 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
The clock speed and system bus are determined by the kind of processor you have installed in your system. You can use the sub menu to change the supervisor password. If you enable this item, the system can automatically resume if there is an incoming call on the Modem. When installing a Rs740mm- heatsink and cooling fan make sure that you DO NOT scratch the motherboard or any of the surfacemount resistors with the clip of the cooling fan.
RSM-M AGM-M VA | Ecs AGM-M AM2+ G Sataii PCI-e X16
ece Using the Motherboard Software 46 5. Front Panel Audio header This header allows the user to install auxiliary front-oriented microphone and lineout ports for easier access. This file contains the information needed to locate the drivers for your motherboard.
Over-clocking components can adversely affect the reliability of the system and introduce errors into your system. When the system is turned back on, the system is configured with the values you stored in CMOS. This motherboard may adopt 8-channel audio ports that correspond to the A, B, C, and E port respectively. Refer to the following: On most motherboards, there are small surface-mount resistors near the processor socket, which may be damaged if the cooling fan is carelessly installed.
Pin 1 is labeled. The third jack is for microphone. Do not touch the components or metal parts. Install the edge connector of the add-on card into the expansion slot.
Other options lead to dialog boxes that prompt you for information. Operation is subject to the following conditions: Use this item to determine the device order the computer used to look for an operating system to load at start-up time. Create a bootable system disk. Onboard parallel port header This is a header that can ba used to connect to the printer, scanner or other devices. Some hardware specifications and software items are subject to change without prior notice.
If the card is not Plug and Play, you may have to manually configure the card before installation.
ECS A740GM-M User Manual
EXE by double-clicking rrs740m-m file and then following the instructions on the screen. Installation Procedure Refer to the following to install the memory modules. Align and insert the CPU correctly. Installing the Motherboard 20 Follow these instructions to install an add-on card: The installation program begins: Use the cursor arrow keys to move the highlight to other options.
Checking Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. Handle the modules only by their edges.
AGM-M V RSM-M | Ecs AGM-M G AM2+ DDR2 SATA2 Mb
Use the cursor arrow keys to scroll through the items in the submenu. This concludes Chapter 2. Each module can be installed with 8 GB of memory.
The first jack is for stereo line-in signal.
During the Windows Vista Driver Auto Setup Procedure, users should use one of the following two methods to install the driver after the system restart.